-spec destroy(This :: wxPrintout()) -> ok.

Destructor.

-spec fitThisSizeToPage(This, ImageSize) -> ok
                           when This :: wxPrintout(), ImageSize :: {W :: integer(), H :: integer()}.

Set the user scale and device origin of the wxDC associated with this wxPrintout so that the given image size fits entirely within the page rectangle and the origin is at the top left corner of the page rectangle.

On MSW and Mac, the page rectangle is the printable area of the page. On other platforms and PostScript printing, the page rectangle is the entire paper.

Use this if you want your printed image as large as possible, but with the caveat that on some platforms, portions of the image might be cut off at the edges.

-spec fitThisSizeToPageMargins(This, ImageSize, PageSetupData) -> ok
                                  when
                                      This :: wxPrintout(),
                                      ImageSize :: {W :: integer(), H :: integer()},
                                      PageSetupData :: wxPageSetupDialogData:wxPageSetupDialogData().

Set the user scale and device origin of the wxDC associated with this wxPrintout so that the given image size fits entirely within the page margins set in the given wxPageSetupDialogData object.

This function provides the greatest consistency across all platforms because it does not depend on having access to the printable area of the paper.

Remark: On Mac, the native wxPageSetupDialog does not let you set the page margins; you'll have to provide your own mechanism, or you can use the Mac-only class wxMacPageMarginsDialog.

-spec fitThisSizeToPaper(This, ImageSize) -> ok
                            when This :: wxPrintout(), ImageSize :: {W :: integer(), H :: integer()}.

Set the user scale and device origin of the wxDC associated with this wxPrintout so that the given image size fits entirely within the paper and the origin is at the top left corner of the paper.

Use this if you're managing your own page margins.

Note: With most printers, the region around the edges of the paper are not printable so that the edges of the image could be cut off.

-spec getDC(This) -> wxDC:wxDC() when This :: wxPrintout().

Returns the device context associated with the printout (given to the printout at start of printing or previewing).

The application can use getDC/1 to obtain a device context to draw on.

This will be a wxPrinterDC (not implemented in wx) if printing under Windows or Mac, a wxPostScriptDC if printing on other platforms, and a wxMemoryDC if previewing.

-spec getLogicalPageMarginsRect(This, PageSetupData) ->
                                   {X :: integer(), Y :: integer(), W :: integer(), H :: integer()}
                                   when
                                       This :: wxPrintout(),
                                       PageSetupData :: wxPageSetupDialogData:wxPageSetupDialogData().

Return the rectangle corresponding to the page margins specified by the given wxPageSetupDialogData object in the associated wxDC's logical coordinates for the current user scale and device origin.

The page margins are specified with respect to the edges of the paper on all platforms.

-spec getLogicalPageRect(This) -> {X :: integer(), Y :: integer(), W :: integer(), H :: integer()}
                            when This :: wxPrintout().

Return the rectangle corresponding to the page in the associated wxDC 's logical coordinates for the current user scale and device origin.

On MSW and Mac, this will be the printable area of the paper. On other platforms and PostScript printing, this will be the full paper rectangle.

-spec getLogicalPaperRect(This) -> {X :: integer(), Y :: integer(), W :: integer(), H :: integer()}
                             when This :: wxPrintout().

Return the rectangle corresponding to the paper in the associated wxDC 's logical coordinates for the current user scale and device origin.

-spec getPageSizeMM(This) -> {W :: integer(), H :: integer()} when This :: wxPrintout().

Returns the size of the printer page in millimetres.

-spec getPageSizePixels(This) -> {W :: integer(), H :: integer()} when This :: wxPrintout().

Returns the size of the printer page in pixels, called the page rectangle.

The page rectangle has a top left corner at (0,0) and a bottom right corner at (w,h). These values may not be the same as the values returned from wxDC:getSize/1; if the printout is being used for previewing, a memory device context is used, which uses a bitmap size reflecting the current preview zoom. The application must take this discrepancy into account if previewing is to be supported.

-spec getPaperRectPixels(This) -> {X :: integer(), Y :: integer(), W :: integer(), H :: integer()}
                            when This :: wxPrintout().

Returns the rectangle that corresponds to the entire paper in pixels, called the paper rectangle.

This distinction between paper rectangle and page rectangle reflects the fact that most printers cannot print all the way to the edge of the paper. The page rectangle is a rectangle whose top left corner is at (0,0) and whose width and height are given by wxDC::GetPageSizePixels().

On MSW and Mac, the page rectangle gives the printable area of the paper, while the paper rectangle represents the entire paper, including non-printable borders. Thus, the rectangle returned by wxDC::GetPaperRectPixels() will have a top left corner whose coordinates are small negative numbers and the bottom right corner will have values somewhat larger than the width and height given by wxDC::GetPageSizePixels().

On other platforms and for PostScript printing, the paper is treated as if its entire area were printable, so this function will return the same rectangle as the page rectangle.

-spec getPPIPrinter(This) -> {W :: integer(), H :: integer()} when This :: wxPrintout().

Returns the number of pixels per logical inch of the printer device context.

Dividing the printer PPI by the screen PPI can give a suitable scaling factor for drawing text onto the printer.

Remember to multiply this by a scaling factor to take the preview DC size into account. Or you can just use the FitThisSizeToXXX() and MapScreenSizeToXXX routines below, which do most of the scaling calculations for you.

-spec getPPIScreen(This) -> {W :: integer(), H :: integer()} when This :: wxPrintout().

Returns the number of pixels per logical inch of the screen device context.

Dividing the printer PPI by the screen PPI can give a suitable scaling factor for drawing text onto the printer.

If you are doing your own scaling, remember to multiply this by a scaling factor to take the preview DC size into account.

-spec getTitle(This) -> unicode:charlist() when This :: wxPrintout().

Returns the title of the printout.

-spec isPreview(This) -> boolean() when This :: wxPrintout().

Returns true if the printout is currently being used for previewing.

See: GetPreview() (not implemented in wx)

-spec mapScreenSizeToDevice(This) -> ok when This :: wxPrintout().

Set the user scale and device origin of the wxDC associated with this wxPrintout so that one screen pixel maps to one device pixel on the DC.

That is, the user scale is set to (1,1) and the device origin is set to (0,0).

Use this if you want to do your own scaling prior to calling wxDC drawing calls, for example, if your underlying model is floating-point and you want to achieve maximum drawing precision on high-resolution printers.

You can use the GetLogicalXXXRect() routines below to obtain the paper rectangle, page rectangle, or page margins rectangle to perform your own scaling.

Note: While the underlying drawing model of macOS is floating-point, wxWidgets's drawing model scales from integer coordinates.

-spec mapScreenSizeToPage(This) -> ok when This :: wxPrintout().

This sets the user scale of the wxDC associated with this wxPrintout to the same scale as mapScreenSizeToPaper/1 but sets the logical origin to the top left corner of the page rectangle.

-spec mapScreenSizeToPageMargins(This, PageSetupData) -> ok
                                    when
                                        This :: wxPrintout(),
                                        PageSetupData :: wxPageSetupDialogData:wxPageSetupDialogData().

This sets the user scale of the wxDC associated with this wxPrintout to the same scale as mapScreenSizeToPageMargins/2 but sets the logical origin to the top left corner of the page margins specified by the given wxPageSetupDialogData object.

-spec mapScreenSizeToPaper(This) -> ok when This :: wxPrintout().

Set the user scale and device origin of the wxDC associated with this wxPrintout so that the printed page matches the screen size as closely as possible and the logical origin is in the top left corner of the paper rectangle.

That is, a 100-pixel object on screen should appear at the same size on the printed page. (It will, of course, be larger or smaller in the preview image, depending on the zoom factor.)

Use this if you want WYSIWYG behaviour, e.g., in a text editor.

-spec new(Title :: string(), OnPrintPage, [Option]) -> wxPrintout:wxPrintout()
             when
                 OnPrintPage :: fun((wxPrintout(), Page :: integer()) -> boolean()),
                 Option ::
                     {onPreparePrinting, fun((wxPrintout()) -> ok)} |
                     {onBeginPrinting, fun((wxPrintout()) -> ok)} |
                     {onEndPrinting, fun((wxPrintout()) -> ok)} |
                     {onBeginDocument,
                      fun((wxPrintout(), StartPage :: integer(), EndPage :: integer()) -> boolean())} |
                     {onEndDocument, fun((wxPrintout()) -> ok)} |
                     {hasPage, fun((wxPrintout(), Page :: integer()) -> ok)} |
                     {getPageInfo,
                      fun((wxPrintout()) ->
                              {MinPage :: integer(),
                               MaxPage :: integer(),
                               PageFrom :: integer(),
                               PageTo :: integer()})}.

Constructor.

Creates a wxPrintout object with a callback fun and optionally other callback funs. The This argument is the wxPrintout object reference to this object

Notice: The callbacks may not call other processes.

-spec offsetLogicalOrigin(This, Xoff, Yoff) -> ok
                             when This :: wxPrintout(), Xoff :: integer(), Yoff :: integer().

Shift the device origin by an amount specified in logical coordinates.

-spec setLogicalOrigin(This, X, Y) -> ok when This :: wxPrintout(), X :: integer(), Y :: integer().

Set the device origin of the associated wxDC so that the current logical point becomes the new logical origin.